Data sheet: Canon FL 100 mm f/3.5

Pekka Buttler, 12/2023

Pictured: Canon FL 100 mm f/3.5 lens.

Specifications

The table below summarizes the lens’ key specifications:

Brand:CanonLens nameFL 100mm 1:3.5
Focal length(s)1100 mmAngle-of-view222°
Maximum Aperturef/3.5In Production1964–1971
Lens mountCanon FLSubfamily (if applicable)N/A
Length363,8 mmDiameter463,9 mm (locking ring)
60,3 mm (lens housing)
Filter ring diameter48 mmWeight283 grams
Lens element count5Lens group count4
Aperture blades (S/R/C)56 SFocus throw195 °
Minimum focusing distance100 cmsMaximum magnification1:9,9
Has manual aperture ringYESHas Manual focus ringYES

Further notes:
• This lens’ filter ring sports the (today) somewhat nonstandard diameter of 48 mm. The typical lens cap was a slip-on lens cap with the inner diameter of 50 mm. The Canon T-50-2 seems a good fit.
• Unlike many Canon FL lenses that were introduced early on, this lens never received an upgrade. Hence, this lens has the dual ring aperture control arrangement found on all early Canon FL lenses.

History of Canon FL lenses

Canon is undoubtedly one of the great names in 35 mm SLR photography. Ever since the 1959 introduction of the Canonflex – Canon’s first interchangeable lens SLR – Canon has constantly focused on being at the forefront of Camera innovation. Often this has necessitated taking stock and redesigning both cameras, lenses and lens mounts. Unlike its archival Nikon, Canon has not tried to integrate all novel features in the same lens mount, but has instead repeatedly launched new, modified mounts to facilitate new features, while still often (but not always) managing to maintain a decent degree of backwards compatibility.

In short (a longer version is here), the development of Canon SLR mounts can be traced as follows:
• 1959–1963: R-mount 6. Canon’s first SLR lens mount. Breech lock-type mount with aperture automation (camera is able to stop down lens for taking the shot.
• 1964–1969: FL-mount. Breech-lock type mount, physically similar mount as Canon R-mount, but camera-to-lens communication linkages somewhat different. Cannot communicate selected aperture to body (stop-down-metering only).
• 1970–1978: FD-mount. Breech-lock mount. FD lenses compatible with FL-cameras and vice versa. Manual focus lenses that communicate aperture information to camera, hence opening the door for automatic exposure (both shutter priority and aperture priority possible)
• 1979–1986: new FD-mount (a.k.a. FDn). Bayonet mount, backwards compatible with FL and FD mounts. Otherwise, as FD mount.
• 1987–today: EF-mount. Electronically controlled autofocus lenses that use an internal focusing motor. Compatible with previous mount lenses only using an adapter with optics.

While many see the Canon FL mount lenses as risky oddities compared to the subsequent FD and FDn lenses, Canon’s lineup of FL lenses is not to be frowned at as, in many ways, the FL lenses laid the groundwork for the subsequent success of the FD system. Granted, the coating technology is decidedly dated, and the need for stop-down metering is decidedly a hassle on Canon FD bodies, but especially when adapting lenses on mirrorless cameras, Canon FL lenses offer an interesting value proposition

Related versions

Canon has a history of manufacturing 100 mm (non-macro) SLR lenses, that can be summarised (based on data from the Canon camera museum) as:

• R 100 mm f/2 (1959–?), 6 elements in 4 groups, 6 blades, 58 mm filter, 515 grams
• R 100 mm f/3.5 (I) (1961–1963), 5 elements in 4 groups, ? blades, 40 mm filter, 210 grams
• R 100 mm f/3.5 (II) (1963–1964), 5 elements in 4 groups, ? blades, 40 mm filter, 210 grams
• FL 100 mm f/3.5 (1964–1971), 5 elements in 4 groups, 6 blades, 48 mm filter, 278 grams
• FD 100 mm f/2.8 chrome nose (1971–1973), 5 elements in 5 groups, 8 blades, 55 mm filter, 430 grams [data sheet]
• FD 100 mm f/2.8 S.S.C (1973-1979), 5 elements in 5 groups, 8 blades, 55 mm filter, 360 grams
• FDn 100 mm f/2.8 (1979–1986), 5 elements in 5 groups, 6 blades, 52 mm filter, 270 grams
• FDn 100 mm f/2 (1980–1991), 6 elements in 4 groups, 8 blades, 52 mm filter, 445 grams
• EF 100 mm f/2 (1991–2021), 8 elements in 6 groups, 8 blades, 58 mm filter, 460 grams

Adapting

NOTE! Unless noted otherwise, the following applies to all Canon FL lenses:

This lens cannot be used natively on any current SLR or dSLRs. To use it in its native environment, you will need a Canon FL or FD-mount film body.

Thanks to being a fully manual lens (manual aperture, manual focus), the lens can be adapted to all mirrorless cameras using a suitable adapter. However, to be able to stop down the lens, you will need to take one of two routes:

1) Acquire a Canon FD adapter and use its ability to engage the FD/FL lens’ aperture control lever, to make sure that the diaphragm’s opening always reflects the aperture ring’s selection.

2) Acquire a Canon FL adapter (or modify a Canon FD adapter by removing its aperture control lever) and instead engage the FL lens’ preset ring before taking a shot.

Moreover, a large range of special adapters (helicoid adapters, tilt/shift adapters, speed boosters) for using Canon FD (And, hence, Canon FL) lenses on most mirrorless systems are available.

Using Canon FL lenses on dSLRs is a possibility, but is not problem free. Thanks to the relatively short flange focal distance of the Canon FL/FD mount (at 42,0 mm, clearly shorter than that of any full-frame dSLR mount), any adapter will necessitate some optics to achieve infinity focus. Again, a Canon FD adapter should work…

Footnotes

1 Focal length is (unless stated otherwise) given in absolute terms, and not in Full-frame equivalent. For an understanding of whether the lens is wide/tele, see ‘Angle-of-view’.

2 Picture angle is given in degrees (based on manufacturers’ specs) and concerns the diagonal picture angle. Rule of thumb:
> 90 ° ==> Ultra-wide-angle
70–90 ° ==> Wide-angle
50–70 ° ==> Moderate wide-angle
40–50 ° ==> ‘Standard’ or ‘normal’ lens
20–40 ° ==> Short tele lens
10-20 ° ==> Tele lens
5-10 ° ==> Long tele lens
< 5 ° ==> Ultra-tele lens

3 Length is given from the mount flange to the front of lens at infinity.

4 Diameter excludes protrusions such as rabbit ears or stop-down levers.

5 S=straight; R=rounded; C=(almost)circular at all apertures.

6 The Canon-R mount should possibly be renamed to (or referred to) as the Canonflex mount to avoid confusion with the modern mirrorless mount that is sometimes also referred to as the Canon R mount.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.