Pekka Buttler, 06/2026

Specifications
The table below summarises the lens’ key specifications (measurements based on sample pictured above):
| Brand(s): | Miranda Soligor Miranda | Lens name | 1:1.9 f=5cm Auto 1:1.9 f=5cm |
| Focal length(s)1 | 50 mm | Angle-of-view2 | 46 ° |
| Maximum Aperture | f/1.9 | In Production | 1960–70 |
| Lens mount (this lens) | Miranda | Mount subtype | Automex/Sensorex (Auto aperture and external aperture coupling arm) |
| Length3 | 41,3 mm | Diameter4 | 57,4 mm |
| Filter ring diameter | 46 mm | Weight | 192 grams |
| Lens element count | 6 | Lens group count | 4 |
| Aperture blades (S/R/C)5 | 6 S | Focus throw | 290 ° |
| Minimum focusing distance (measured) | 48 cms | Maximum magnification (measured) | 1:6,9 |
| Has manual aperture ring | YES | Has Manual focus ring | YES |
| Aperture mechanism type | Automatic | Aperture click stops 6 | none |
Other notes:
• There are records of a 5 cm f/1.9 lens for the Automex/Sensorex range of cameras (with external aperture coupling arm) using both “Auto Miranda” and “Soligor Miranda” branding. The ‘Soligor Miranda 5/1.9) is mentioned at the time of the launch of the Automex camera (1960) whereas by the 1963 launch of the Automex II the respective lens is referred to as the as the ‘Auto Miranda’.
• Because the pictured ‘Soligor Miranda’ lens is basically identical to later ‘Auto Miranda’ 5/1.9 lenses, it is JAPB’s contention that both lenses are the same (and only the name differs).
• Some later versions might report their focal length in millimetres (but all versions I have seen use centimetres).
• This lens was replaced in 1970 with a 50/1.8 version.
• While the lens reports its minimum focusing distance as 0,45 metres, the tested MFD is 0,48 metres.
• If you want to use a lens hood with this lens, any normal lens hood using a 46 mm filter thread will work nicely.
Historical notes:
• Miranda was – in its heyday – an advanced Japanese camera manufacturer. You can read more about Miranda camera in the JAPB company profile on Miranda camera.
• At this stage Miranda was offering two families of technologies: bodies that used an external aperture coupling arm to communicate the selected aperture to a compatible body (automex series and sensorex series) and bodies that in no way communicated the selected aperture to the camera body that relied on stop-down metering (f-series, g-series and sensomat-series). In many sources these are abbreviated and called the ‘sensorex’ and ‘sensomat’ series respectively.
• These pictured samples are for use with Automex/Sensorex cameras, but the same-era lenses for the f-series, g-series and sensomat-series rarely differ substantially.
• Importantly, Miranda was a camera manufacturer and not a lens manufacturer. This mean that from early on, Miranda cameras came equipped with various brands of lenses, including some rather prominent manufacturers such as Kowa and Zunow.
• Lenses branded as “Miranda” or “Soligor Miranda” were not manufactured by Miranda, but were sourced from other manufacturers and branded ‘Miranda’. Most often these lenses were sourced from Miranda’s long-time partner (and later: owner) Soligor (Allied Impex Corporation). Hence, the actual manufacturer of “Miranda” lenses is most often impossible to discern with certainty.
Versions/variants
The table below summarises the development of Miranda 50 mm f/1.9 and f/1.8 lenses. (Underlined data is based on measurements, other data is based on Miranda documentation.)
For more information on generations of Miranda lenses, see the Miranda lens compendium.
| Mainline spec | Years | Generation | Recipe | MFD | Filter | Length | Diameter | Weight | Notes |
|---|---|---|---|---|---|---|---|---|---|
| 50 mm f/1.9 | 1959–60 | PAD | unknown | 0,45 m | unknown | unknown | unknown | unknown | |
| 50 mm f/1.9 | unknown | PAD | 6e / 4g | 0,45 m | 46 mm | unknown | unknown | unknown | |
| 50 mm f/1.9 | 1960–70 | MEX-REX | 6e / 4g | 0,48 m | 46 mm | 41 mm | 58 mm | 192 g | (this lens) also ‘Soligor Miranda’ |
| 50 mm f/1.9 | 1963–68 | F-G-MAT | 6e / 4g | 0,43 m | 46 mm | 42 mm | 58 mm | 193 g | [data sheet] |
| 50 mm f/1.8 | 1970–74 | MEX-REX | 6e / 4g | 0,43 m | 46 mm | 47 mm | 59 mm | 235 g | |
| 50 mm f/1.8 | 1968–74 | F-G-MAT | 6e / 4g | 0,43 m | 46 mm | 42 mm | 59 mm | 203 g | [data sheet] |
| 50 mm f/1.8 | 1972–74 | E | 6e / 4g | 0,45 m | 52 mm | 44 mm | 59 mm | 228 g | [data sheet] |
| 50 mm f/1.8 | 1974–76 | EC | 6e / 4g | 0,43 m | 49 mm | 43 mm | 60 mm | 218 g | [data sheet] |
| 50 mm f/1.8 | 1974–76 | DUAL | 6e / 4g | 0,43 m | 52 mm | 51 mm | unknown | 226 g |
Adapting
This lens cannot be used natively on any current SLR or dSLRs. To use it in its native environment, you will need a Miranda Camera film body. While this lens will mount on any Miranda camera that uses the Miranda mount, its automatic aperture stop-down will work only on Miranda bodies after the Miranda F (launched 1963). For the aperture communication arm to be able to communicate aperture values, this lens needs to be mounted on an Automex or Sensorex series body.
Thanks to being a fully manual lens (manual aperture, manual focus), the lens can be adapted to all mirrorless cameras using a suitable adapter. However, Miranda adapters are not as easily available as adapters for many other legacy era camera mounts, nor is there a wide variety of specialist adapters.
Using Miranda lenses on dSLRs is a theoretical possibility. Thanks to the relatively short flange focal distance of the Miranda mount (at 41,5 mm, clearly shorter than that of any full-frame dSLR mount), any adapter will necessitate some corrective optics to achieve infinity focus.
Footnotes
- Focal length is (unless stated otherwise) given in absolute terms, and not in Full-frame equivalent. For an understanding of whether the lens is wide/tele, see ‘Angle-of-view’. ↩︎
- Picture angle is given in degrees and concerns the diagonal picture angle. Rule of thumb:
> 90 ° ==> Ultra-wide-angle
70–90 ° ==> Wide-angle
50–70 ° ==> Moderate wide-angle
40–50 ° ==> ‘Standard’ or ‘normal’ lens
20–40 ° ==> Short tele lens
10-20 ° ==> Tele lens
5-10 ° ==> Long tele lens
< 5 ° ==> Ultra-tele lens ↩︎ - Length is given from the mount flange to the front of lens at its shortest. ↩︎
- Diameter excludes protrusions such as rabbit ears or stop-down levers. ↩︎
- S=straight; R=rounded; C=(almost)circular at all apertures. ↩︎
- Numbers equal aperture values on aperture ring; • intermediate click; – no intermediate click. ↩︎